Follow the simple steps below to use the d-unlocker server. If you need help with anything please use our support form.
Follow the instructions below to unlock your phone using the D-Unlocker tool.
1. Download the client
To begin with you will need to download the latest version of D-Unlocker. This is available from our site and is located in the downloads section. The file is in zip format so please make sure you have a correct tool for unzipping this.
2. Install Drivers
Always insure all original Sonyericson modern drivers are installed for your phone. The you will need to install the special D-Unlocker drivers.
Follow these simple steps
- Make sure the phone is powered off and battery and cable are removed
- Insert the battery and press and hold down the C button on the phone
- A found new hardward wizard will appear and ask you to search windows update select not at this time and then choose:
Install from a list or specific location (Advanced)
- click "Browse" and look for drivers in the path: C:\Program Files\D-Unlocker\Drivers\USB Flash vX.X.X.X
* in case you installed the application elsewhere, replace
“C:\Program Files\D-Unlocker” by your install path
click "Next" and then "Finish"
The phone may power on itself after a minute, so when driver installation is finished, disconnect the phone and remove/install its battery
|
3. Install D-Unlocker
Open the client and click on the .exe file to install. Once complete you
will see the d-unlocker on your programs found by clicking the start
button on windows.
4. Enter Username and Password and Configuration Details
Select the d-unlocker option from the menu and when the client
opens select the settings tab.
Now select your langauge from the drop down men. Then fill in the
connection settings if
these are missing They should look like the ones below.
Server Address: 60.54.216.58
Port: 9001
Now enter the username and password for D-Unlocker and
press save changes. If
you dont have a username and password for see our order page by clicking here
5. Connect To D-Unlocker
If you just want to unlock a fully working phone remove the sim card switch the phone on and then connect to the cable. Then move to step 6.
If you wish to fix a phone with damaged security zone then remove battery and sim card. Then reconnect battery dont switch the phone on though. Hold down the C button on the phones keypad and connect the cable then release the C button.
6. The D-Unlocker software will then make a
connection to the server.
6. Sit back and wait
All you need to do now is wait while the server completes
the unlocking process which should take a few mins. Once
the process complete message
is displayed confirming
unlock just remove the cable and battery. Then reconnect
battery to the phone and it now will
be unlocked to all networks.
